RAINMAN portable Watermaker kit 115V 75L

The origins of Rainman established our reputation as the “Portable Watermaker” in the blue case. Although many customers will prefer to install their Rainman, many benefits exist for keeping your system portable.

• You don’t need to install the system. Ten minutes after receiving the system, you can be making fresh drinking water.
• If you are a cruiser and a racer, you can easily offload the weight of about 2/3 of a crew member by putting the watermaker ashore.
• No extra holes in your hull.
• If you are space constrained, you can remove the system for more people and gear on shorter trips.
• If maintenance is required, you bring the system to a technician rather than a technician to your boat.
• When you upgrade your boat, the system goes with you. Installing a system in your boat will not add much value to your boat.
• You can loan it to a friend.
• Reduced initial cost due to no expensive installation process.
• You can fill up your neighbour’s tanks with our product water extension hose.
• Moving the system around is easy if you have an RV, live near water, or have another boat.
• You can easily resell the system if you are no longer getting use out of it.
• Minimise risk to your vessel during storm season by leaving your Rainman ashore.

TWO COMPONENTS – ONE WATERMAKER

• The system is made up of a pressure supply unit (PSU) and a reverse osmosis unit (RO).
• Both parts are required to make a complete watermaker.
• The PSU lifts the seawater, filters out the sediment and puts the system under high pressure, while the RO unit extracts fresh water from the stream of pressurised seawater.
• Most of the water goes out to waste as brine output, while about 20% of the volume is extracted as fresh potable water for your tanks.
• Different RO options exist for you to select with your AC Rainman system, each to achieve their own specific objective.

Portable 115V Kit

55-75 litres/hour

1250 W

1 x RO membrane 40 in.